x-sense XC04-WX Bedienungsanleitung Seite 5

Low-Battery Warning
f the battery is ow, the unit wil chirp once, and the LEDindicator wil flash yel ow every 60 seconds to indicate that the battery
needs replacement. A low battery notification will be sent to your smartphone by the app.
f you pressthe test button when there is a low battery, the ow battery signal will temporarily stop for 10 hours; if you pressthe
test button again,the unit will enter test mode, and then standby mode.
End-of-Life Indication and Hush Control
Once the maximum lifetime of the alarm (10years) is reached,the alarm will beep 3 times and the LED indicator wil flash yel ow
3 times every 60 seconds.This end-of-life signal can be temporarily si enced for 22 hours by pressing the test button. An
end-of-life push notification will be sent to your smartphone by the app.
This end-of-life silencefeature can on y be used for a total of 30 days.After 30 days,the end-of-life signal cannot be silenced
During this end-of-life silenceperiod, your alarm will continue to monitor for CO and provide protection as usual.
To help identify the date to rep ace the alarm, write down the date of first operation on the dedicated labe , ocated on the side
of the alarm.
• 06 •
Device Setup Within the App
Sign Up
To download the app, searchfor X-Sense Home Security in the Apple App Store or
Goog e PlayStore, or simply scan the QRcode. Createan account using a valid email
address. f you already have an account, makesure it is updated to the latest version.
•x
Note: Make sure your phone runs on iOS 1 and above, or Android 8.0 and above.
App Store Google Play
Before connecting alarms, make sure that:
1. Know your Wi-Fi network name and password
2. Makesure you are connecting alarmsto a 24 GHzWi-Fi network (incompatible with 5 GHzWi-Fi network),
3. Makesure the Bluetooth on your phone is turned on.
07 •