Beginning Operation; Safety Rules; Accident Prevention Check; Running-In Instructions - Linde V10E Betriebsanleitung

SAFETV
RULES
The responsible persons, particularly the truck operators
and servicing personn'el, mus! be instructed in the safety
guidelines for the normal and proper use of industrial
trucks supplied with these operating instructions.
Please observe the guidelines and safety rules therein for:
- the operation of industr!al trucks,
- roadways and work areas,
- the operator (rights, duties and rules of behaviour),
- furt her applications,
- various types of drives,
- servicing (maintenance and inspection),
- the annual accident prevention check.
The operator (owner) or responsible person must ensure
that the above guidelines and safety rules are observed.
The depicted safety instructions must be strictly followed
in case of a tip-over during an unauthorized application
due to improper operation.
Torque 150 Nm
28
When familiarizing a trained operator with the truck
following VBG 12 b, acquaint him wHh the
- special features of the industrial truck
- optional attachment
- special operating characteristics.
Practice travel, control and steering operations until they
are completely mastered.
The stabiiity of the truck in the work area is assured if it is
employed properly.
Accident prevention check
The accident prevention rules prescribe that tbe industrial
truck must be checked at least once a year for pi"oper
working condition by trained personnel. Please contact
your authorizeddealer in this regard.
Running-in instructions
The industrial truck can be operated at tull speed directly.
Avoid sustained high loads in the first 50 hours of
operation.
Ouring initial operation after 50 service !lours and after
each wheel change, tighten \vheel nuts daily prior to star-
ting operation until they are seated firmly, Le. until no 1ur-
ther tighteni!'g is possible.
Wheel nuts should be tightened crosswise to the torque
specified in the manual.
THE SAFETY DEVICES AND IN-
TERLOCKINGS MUST BE CHECKED
AT LEAST ONCE DAILY FOR PROPER
OPERAtiON, DEPENDiNG üPON
SERVICE.
THE TRUCK MUST BE TAKEN OUT OF
OPERATION IN CASE OF FAUlTY
OPERATION OR FAllURE.
BEGINNING OPERATiON
Checks before initial service
- Tighten wheel nuts
- Hydraulic oillevel
-c-
Oillevei in gearbox
- Operation of braking system
- Battery charge und electrolyte level
- Battery connections
- Operation of horn
- Check for possible leaks
- Safety devices
- Mast attachments
Daily pre-operational checks and servicing
- Condition and mounting of wheels
- Operation of braking system
- Battery charge and electrolyte level
- Operation of lighting*
- Operation of switch lock
- Visible damage to load lifting members (forks)
- Condition of lift chain
- Damage to overhead guard
- Safety devices
- Operation of steering/steering indicator
- Operation of hydraulics
- Operation of horn
- Operation of interlockings
The safety devices must be checked prior to the com-
mencement of each shift.
* Optional
•
•
•
•