Werbung
˜ Operating the battery pack
m
CAUTION! RISK OF INJURY!
Always switch the power button
u
This avoids accidental starting before
attaching/removing the battery pack
Attaching the battery pack
(Fig. I)
Open the battery cover
Align the battery pack
connector
. Slide the battery pack fully into
[
]
the battery connector.
Removing the battery pack
(Fig. I)
Open the battery cover
side of the spray tank
Press the release button
Remove the battery pack
Checking the battery pack charging
level
(Fig. C)
Press the LED button
The charging level LEDs
LED
Red/orange/green
Red/orange
Red
to O.
[
]
.
[
]
.
[
]
to the battery
[
]
located on the
[
]
.
[
2 ]
.
[
]
.
[
]
.
[
]
light up.
[
]
Charging level
Maximum
Medium
Low
Charging the battery pack
(Fig. D)
NOTE
The battery pack
u
any time without reducing battery life.
Interrupting the charging process does not
u
damage the battery pack
Charge the battery pack
u
operation when the battery pack is at
medium or low charging level.
Insert the battery pack
charger
.
[
]
Connect the power plug
outlet.
The charging control LEDs (green
red
) indicate the status of the battery
[
]
charger
and the battery pack
[
]
LED signal
Red
Green
Green and red flashing Battery pack defective
Red flashing
Green (while no battery
pack is in the battery
charger)
When the battery pack
Remove the battery pack
–
battery charger
Disconnect the power plug
–
socket-outlet.
may be charged at
[
]
.
[
]
before
[
]
into the battery
[
]
with a socket-
[
]
and
[
]
.
[
]
Status
Battery pack charges
Battery pack fully
charged
Battery pack too cold
or too warm
Battery charger ready
is fully charged:
[
]
from the
[
]
.
[
]
from the
[
]
GB
19
Werbung
