Parkside Performance PRDSP 20-Li C2 Bedienungs- Und Sicherheitshinweise Originalbetriebsanleitung Seite 56

˜ Battery pack
˜ Charging the battery pack
Fig. C
NOTE
The battery pack
u
charged at any time without
reducing battery life.
Interrupting the charging process
u
does not damage the battery
pack .
[ ]
Charge the battery pack
u
operation when it is at medium or
low charging level.
1. Insert the battery pack
rapid battery charger
2. Connect the power cord with power
plug to a socket-outlet.
[ ]
3. The charging control LEDs green
and red ) indicate the status of
[ ]
the rapid battery charger
battery pack
[
LEDs
Red LED lights up
Green LED lights
up
Green and red
LED ashing
Red LED ashing
Green LED lights
up (without battery
pack)
When the battery pack
o
charged:
Remove the battery pack
–
the rapid battery charger
Disconnect the power cord with
–
power plug
[
outlet.
54 GB/IE
may be
[ ]
before
[ ]
into the
[ ]
.
[ ]
[
and the
[ ]
:
]
Status
Battery pack
charges
Battery pack fully
charged
Battery pack
defective
Battery pack too
cold or too warm
Charger ready
is fully
[ ]
from
[ ]
.
[ ]
from the socket-
]
˜ Inserting/removing the
battery pack
1. Open the battery compartment
cover Fig. I .
5 ] [
2. Inserting: Place the battery pack
on the guide track and push it back
into the product. The battery pack
will audibly snap in.
3. Removing: Press the release
buttons on the battery pack
[ ]
and pull it out.
4. Close the battery compartment
cover .
5 ] [
˜ C
charging level
Fig. C
Press the
o
battery pack
The battery pack s
o
level is indicated by the battery level
]
indicator
[
LEDs
Red Yellow Green Battery pack fully
Red Yellow
Red
˜ PARKSIDE app
˜ Connecting the product to
the PARKSIDE app
Activate/deactivate the Bluetooth
function on the battery
Press and hold the
o
the battery pack
to activate the Bluetooth
The orange LED of the charging level
LEDs lights up. The Bluetooth
[ ]
function is enabled.
Release the
o
button on the
[ ]
.
[ ]
charging
[ ]
:
]
Status
charged
Battery pack half
charged
Battery pack
needs to be
charged
button
[
for 3 seconds
[ ]
function.
®
button .
[ ]
[ ]
[ ]
®
on
]
®