Parkside Performance PRDSP 20-Li A1 Bedienungs- Und Sicherheitshinweise Seite 30

NOTE
Do not use chemical, alkaline, abrasive or
u
other aggressive detergents or disinfectants
to clean this product as they might be
harmful to its surfaces.
Prepare a container approved for chemicals.
Squeeze down the trigger
residual spray material into the container.
Release the trigger once the spray material
has been completely emptied.
Switch the power button
Remove the battery pack
Unscrew the shut-off valve
hose .
3 ] [
Unscrew the nut from the shut-off valve
drain residual spray material (Fig. N).
Unscrew the removable handle
shut-off valve .
8 ] [
Take out the small filter
Remove the nozzle accessory
Unscrew the spray tank cover
the basket filter
[
If any spray solution is left in the spray
tank :
2 ] [
Pour the spray solution from the spray
–
tank into a container approved for
2 ] [
chemicals. Do not store chemicals in the
spray tank for a prolonged period.
Use clean water to clean and rinse the
–
spray tank and accessories. A small
2 ] [
amount of mild household detergent may
be added.
Use a damp, lint-free cloth to clean the
–
spray tank
. Dry the surface with a dry
2 ] [
cloth.
to spray the
[ ]
to O.
[ ]
.
[ ]
from the
8 ] [
8 ] [
of the
[ ]
(Fig. O).
[ ]
.
9 ] [
and remove
1 ] [
.
]
The following parts can be detached and
cleaned under running water:
Plastic nozzle pipe
– [ 5 ]
Stainless steel nozzle pipe
–
[ 6 ]
Nozzle accessories
– [ 9 ]
Basket filter
– [ ]
Small filter
– [ ]
If the nozzle accessories
spray head
pushing a needle through them.
If the basket filter
cannot be cleaned thoroughly under running
water, use a brush to clean.
to
or the cone
9 ] [
are clogged, clean them by
[ ]
and the small filter
[ ] [ ]
GB 27