Herunterladen Diese Seite drucken

Parkside Performance PRDSP 20-Li A1 Bedienungs- Und Sicherheitshinweise Seite 19

Werbung

Maintain this product in accordance with
 
these instructions and keep it well lubricated
(where appropriate).
Plan your work schedule to spread any high
 
vibration tool use across a longer period of
time.
˜ Behaviour in emergency
situations
Familiarise yourself with the use of this product by
means of this instruction manual. Memorise the
safety warnings and follow them to the letter. This
will help to prevent risks and hazards.
Always be alert when using this product, so
 
that you can recognise and handle risks early.
Fast intervention can prevent serious injury
and damage to property.
Switch the product off and remove the battery
 
pack if there are malfunctions. Have the
product checked by a qualified professional
and repaired, if necessary, before you
operate it again.
Keep instructions or label of the spray
 
materials available at all times in order
to inform the doctor about the chemical
concerned in an emergency.
In an emergency, follow the chemical
manufacturer's instructions provided or on the
label.
Observe manufacturer's safety data sheets.
Procedure after accidents: If you have come
 
into contact with the spray solution, switch off
the product by switching the power button
to O. Release the product immediately by
lifting the lower end of the tab on both sides
of the shoulder strap
16 GB
[
(Fig. P).
4 ]
[
Danger to health due to contact
 
with plant protection products! Plant
protection products may cause damage to
health by inhalation, ingestion or absorption
through the skin. If symptoms occur or in case
of doubt, seek medical advice. Therefore,
observe the following safety instructions:
Observe the safety instructions on the
labels of the plant protection products.
Observe the specified max. concentration.
Certain liquids require protective goggles,
gloves or other protective measures.
Always request and observe a safety data
sheet from the chemical manufacturer.
Always empty the spray solution when you
are safe.
˜ Residual risks
Even if you are operating this product in
accordance with all the safety requirements,
potential risks of injury and damage remain. The
following dangers can arise in connection with the
structure and design of this product:
Health defects resulting from vibration
 
emission if the product is being used over
long periods of time or not adequately
managed and properly maintained.
Danger of injury and property damage
 
caused by flying objects.
]

Werbung

loading

Diese Anleitung auch für:

376264 2104