Parkside Performance PRDSP 20-Li C2 Bedienungs- Und Sicherheitshinweise Originalbetriebsanleitung Seite 21
Akku‑rucksack‑drucksprüher 20 v
Vorschau ausblenden
Andere Handbücher für PRDSP 20-Li C2:
- Bedienungs- und sicherheitshinweise originalbetriebsanleitung (357 Seiten) ,
- Bedienungs- und sicherheitshinweise (193 Seiten) ,
- Bedienungs- und sicherheitshinweise originalbetriebsanleitung (325 Seiten)
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
1 . Insert the battery pack
23 ]
[
battery charger
2 . Connect the power cord with power
22 ]
[
plug
to a socket-outlet .
3 . The charging control LEDs (green
24 ]
[
and red
) indicate the status of the
rapid battery charger
18 ]
[
pack
:
LEDs
Red LED lights up
Green LED lights up
Green and red LED
flashing
Red LED flashing
Green LED lights up
(without battery pack)
When the battery pack
o
–
Remove the battery pack
rapid battery charger
–
Disconnect the power cord with power
22 ]
[
plug
from the socket-outlet .
˜ Inserting/removing the
battery pack
1 . Open the battery compartment cover
(Fig . I) .
2 . Inserting: Place the battery pack
the guide track and push it back into the
product . The battery pack will audibly snap
in .
3 . Removing: Press the release buttons
on the battery pack
4 . Close the battery compartment cover
18 ]
[
into the rapid
.
[
25 ]
23 ]
[
and the battery
Status
Battery pack charges
Battery pack fully
charged
Battery pack defective
Battery pack too cold
or too warm
Charger ready
18 ]
[
is fully charged:
18 ]
[
from the
[
23 ]
.
5 ]
[
18 ]
[
on
19 ]
[
18 ]
[
and pull it out .
5 ]
[
.
˜ Checking the battery pack's
charging level
Fig . C
o
Press the
button
[
18 ]
pack
.
The battery pack's
o
indicated by the battery level indicator
LEDs
Red ‒ Yellow ‒ Green Battery pack fully
Red ‒ Yellow
Red
˜ PARKSIDE app
˜ Connecting the product to
the PARKSIDE app
Activate/deactivate the Bluetooth
function on the battery
o
Press and hold the
18 ]
[
battery pack
for 3 seconds to activate
the Bluetooth
®
function . The orange LED of
the charging level LEDs
®
Bluetooth
function is enabled .
Release the
button
o
o
Press and hold the
[
18 ]
the battery pack
deactivate the Bluetooth
orange LED of the charging level LEDs
goes off . The Bluetooth
deactivated . In the PARKSIDE app the
product is shown as offline .
˜ Connecting the product to
the PARKSIDE app again
NOTE
u
The product can only be connected
to the PARKSIDE app if the battery
18 ]
[
pack
is inserted in the product .
20 ]
[
on the battery
18 ]
[
charging level is
21 ]
[
Status
charged
Battery pack half
charged
Battery pack needs to
be charged
®
[
20 ]
button
on the
[
21 ]
lights up . The
[
20 ]
.
20 ]
[
button
on
for 10 seconds to
®
function . The
21 ]
[
®
function is
GB
:
19
Werbung
