Filling the spray tank
m
WARNING! Risk of accidental
contact of spray materials with
skin and eye.
Always wear appropriate personal
u
protection equipment as instructed by
the chemical manufacturer when using,
preparing, handling, spraying, or disposing
of chemicals. This equipment includes at
least goggles, gloves, respiratory protection
and protective clothing.
Avoid accidental starting. Ensure the power
u
is switched to O and the battery
button
[
]
pack
is removed from the product.
[
]
The maximum volume if the spray tank
u
is 16 litres. Do not overfill the spray tank!
NOTE
Thoroughly clean and rinse measuring
u
containers that are used for filling the spray
tank
and for pre-mixing spray materials.
2 ]
[
The basket filter
u
[
clog or damage the pump from entering
the spray tank.
Always reinsert the basket filter before
u
reinstalling the spray tank cover
Use only with plant protection products
u
approved by local/national regulatory
authorities for plant protection products for
use with knapsack sprayers.
[
2 ]
prevents debris that can
]
.
1 ]
[
Before filling the spray tank
spray solution
Carry out a test run with fresh water. Check
all parts of the product for leaks.
Filling a clean spray tank
Stand the spray tank
Unscrew and remove the spray tank
cover
. Check if the basket filter
1 ]
[
correctly placed (Fig. E).
Carefully pour the spray solution into the
spray tank
.
2 ]
[
Do not fill the spray tank
maximum mark.
After filling, fit the spray tank cover
Tighten the spray tank cover firmly.
NOTE
Fix a tag on the product to note what
u
chemical is used.
m
WARNING!
Never attempt to fill the spray
u
tank
while carrying it.
[
2 ]
Changing the spray material
If any spray material is left in the spray tank
Unscrew the spray tank cover
the basket filter
[
Pour the spray material from the spray
tank
into a container approved for
2 ]
[
chemicals. Do not store chemicals in the spray
tank for a prolonged period.
Use clean water to clean and rinse the spray
tank
and accessories. A small amount of
[
2 ]
mild household detergent may be added.
Pour in the new spray material (see "Filling
the tank").
with
2 ]
[
on a level surface.
2 ]
[
is
[
]
above the
2 ]
[
.
1 ]
[
2 ]
[
and remove
[
1 ]
.
]
GB
:
23