Parkside Performance PRDSP 20-Li A1 Bedienungs- Und Sicherheitshinweise Seite 28

Take special care in slippery conditions –
damp, snow, ice, on slopes or uneven ground.
Watch out for obstacles: Be careful of refuse,
tree stumps, roots and ditches which could
cause you to trip or stumble.
To reduce the risk of accidents, take a break
in good time to avoid tiredness or exhaustion.
Work calmly and carefully – in daylight
conditions and only when visibility is good.
Stay alert so as not to endanger others.
Never work on a ladder or any other insecure
support.
When working in open ground and gardens
take special care to avoid harming small
animals.
To avoid drifting, different parameters
should be taken into account when spraying.
Examples:
Nozzles
–
– Pressure
Nozzle pipe length
–
Wind speed
–
To reduce the risk of electrocution, never work
in the vicinity of live wires or power cables.
Always clean the product before filling in a
different spray material (see "Cleaning and
care").
Do not operate the product at temperatures
above +40 °C in the shade or in direct
sunlight.
Start spraying
Squeeze the trigger
a stream of spray solution for spraying
consumer grade home and garden chemicals.
Stop spraying
Release the trigger
Continuous spraying without holding
down the trigger
(Fig. M)
Squeeze down the trigger
Push the lock-on latch
lock position.
Unlocking the trigger
Squeeze the trigger
Fold back the lock-on latch
trigger (Fig. M).
[ ]
NOTE
During work breaks, do not leave the
u
product in the hot sun or near any heat
source.
Overdosing may damage plants and the
u
environment.
Underdosing may result in unsuccessful
plant treatment.
down to release
[ ]
.
[ ]
.
[ ]
forward so it is in
[ ]
further down.
[ ]
under the
[ ]
GB 25