Parkside Performance PRDSP 20-Li C2 Bedienungs- Und Sicherheitshinweise Seite 19

Keep tight grip on the handles/grip
surface.
Maintain this product in accordance
with these instructions and keep it
well lubricated (where appropriate).
Plan your work schedule to spread
any high vibration tool use across a
longer period of time.
˜ Behaviour in emergency
situations
Familiarise yourself with the use of this
product by means of this instruction
manual. Memorise the safety warnings
and follow them to the letter. This will
help to prevent risks and hazards.
Always be alert when using this
product, so that you can recognise
and handle risks early. Fast
intervention can prevent serious
injury and damage to property.
S it h the produ t o and remove
the battery pack if there are
malfunctions. Have the product
he ked by a ualified professional
and repaired, if necessary, before
you operate it again.
Keep instructions or label of the
spray materials available at all
times in order to inform the doctor
about the chemical concerned in an
emergency.
In an emergency, follow the chemical
manufacturer's instructions provided
or on the label.
Observe manufacturer's safety data
sheets.
Procedure after accidents: If you
have come into contact with the
spray solution, s it h o the produ t
by pressing the on o s it h
Release the product immediately by
lifting the lower end of the tab on
both sides of the shoulder strap
ig. P .
Danger to health due to contact
with plant protection products!
Plant protection products may cause
damage to health by inhalation,
ingestion or absorption through
the skin. If symptoms occur or in
case of doubt, seek medical advice.
Therefore, observe the following
safety instructions:
Observe the safety instructions on
–
the labels of the plant protection
products.
Observe the spe ified ma .
–
concentration.
Certain liquids require protective
–
goggles, gloves or other protective
measures.
Always request and observe
–
a safety data sheet from the
chemical manufacturer.
Always empty the spray solution
–
when you are safe.
˜ Residual risks
Even if you are operating this product
in accordance with all the safety
requirements, potential risks of injury
and damage remain. The following
dangers can arise in connection with the
structure and design of this product:
Health defects resulting from
vibration emission if the product is
being used over long periods of time
or not adequately managed and
properly maintained.
Danger of injury and property
damage aused by ying obje ts.
.
[ ]
[ 6 ]
GB 17