Vibration And Noise Reduction; Behaviour In Emergency Situations - Parkside Performance Pprds 20-Li C3 Bedienungs- Und Sicherheitshinweise

When assembling or removing
accessories, do not point them
towards yourself or other persons.
The product must only be operated
by 1 person at a time. Nobody else
must be within a radius of 15 metres
at the same time.
If there is no spray coming out from
the nozzle or the spray amount is
decreased, the hose and spray
system may be blocked. Rinse and
clean all parts of the hose and spray
system shut o valve, small filter,
nozzle pipe, hose, nozzle) with clean
water.
After the product has been stored
for a long time e.g. during winter , fill
the spray tank
3 ] [
Carry out a test run to check if there
are any leakages or cracks.
Release the residual pressure in
the spray tank after each use and
especially before removing the spray
tank cover. Do so by pressing the
trigger.
Do not modify the product under any
circumstance. Modifications may
result in serious injury.
All servicing and maintenance,
other than the items listed in this
instruction manual, should be
performed by an authorised service
centre.
Only use spare parts and
accessories provided by the
manufacturer. All other repairs
shall only be carried out by an
authorised service centre. Improper
maintenance, use of non-conforming
components and removal of
safety devices can lead to a
hazardous situation, such as death,
life-threatening injuries and damage.
Check the volume application rate
during operation.
50 GB/IE
with clean water.
˜ Vibration and noise
reduction
To reduce the impact of noise and
vibration emission, limit the time of
operation, use low-vibration and
low-noise operating modes and wear
personal protective equipment.
Take the following points into account
to minimise the vibration and noise
exposure risks:
Only use the product as intended by
its design and these instructions.
Ensure that the product is in good
condition and well maintained.
Keep tight grip on the handles/grip
surface.
Maintain this product in accordance
with these instructions and keep it
well lubricated (where appropriate).
Plan your work schedule to spread
any high vibration tool use across a
longer period of time.
˜ Behaviour in emergency
situations
Familiarise yourself with the use of this
product by means of this instruction
manual. Memorise the safety warnings
and follow them to the letter. This will
help to prevent risks and hazards.
Always be alert when using this
product, so that you can recognise
and handle risks early. Fast
intervention can prevent serious
injury and damage to property.
Switch the product o and remove
the battery pack if there are
malfunctions. Have the product
checked by a ualified professional
and repaired, if necessary, before
you operate it again.