M Aintenance Tips - Promed Uvl-54 All-In Gebrauchsanleitung

m
aIntenance tIPs
To preserve the safety, reliability and performance of the device, no extensions, new settings,
modifications or repairs should be carried out, unless these are carried out by persons
authorised by Promed.
• Keep the interior of the device free from gel and acrylic residues as far as possible.
• Ensure that the magnets (L) do not get dirty as this means that the correct connection
between the upper casing (J) and the magnet base plate (K) can no longer be guaranteed.
• Remove dirt from the exterior of the device using a cloth daubed in alcohol and avoid
getting moisture into the interior.
• Follow the prescribed safety measures of the manufacturer.
• The casing may only be cleaned with a damp cloth. Do not use any solvents, acetone or
acidic cleaners, just clear water.
d
IsPosaL
Power tools, accessories, and packaging should be recycled in an environmentally suitable
DE manner.
Only for EU countries:
EN
Do not dispose of power tools with the domestic waste!In accordance with the
European Directive 2012/19/EU on waste electrical and electronic equipment and
itsimplementation into national law, nonfunctioning power tools must be collected
separately and recycled in an environmentally suitable manner.
FR
This symbol indicates that disposal of this product in the domestic waste is not permitted within
the EU. Waste devices contain valuable recyclable material that should be recycled. Recycling
IT
also prevents uncontrolled waste disposal from damaging the environment and human health.
Therefore, please dispose of all waste devices in the appropriate collection systems or send the
device to the place where you bought the device for disposal. They will then recycle the device.
ES
m
aIntenance tIPs
NL
This product was produced with the utmost care and was thoroughly tested before it left the factory.
Therefore, we provide a warranty period of 24 months from the date of purchase for this product.
RU
Promed products conform to their description and the relevant specifications; it is your responsibility
to ensure that the product which you have purchased is designed for your intended use.
• In the event of material defects and/or manufacturing errors which appear during proper use
PL
and are detected during the warranty period, we will replace all defective parts of the product
free of charge within the warranty period, including the labour costs for warranty repairs.
• The warranty does not cover:
• Normal wear on the product
SE
• Defects which were caused during transportation or storage of the product
• Defects or damage which were caused through improper use or inadequate maintenance
• Damage resulting from disregarding the notes in the operating manual
FI
• Damage resulting from modifications to the product which were not carried out by
Promed.