Accessories - Promed Uvl-54 All-In Gebrauchsanleitung

I
nFormatIon on the unIt
Please check that the scope of delivery is complete before commissioning the device. The
supplied power adapter is an electronic power supply unit that is intended to be used at an
operating voltage of 100 VAC to 240 VAC.
• The device Promed UVL-54 All-In is suitable for curing all UV / LED gels, coatings and
acrylics used in the areas of nail technology and nail design and which are suitable for
LED curing devices.
• In order to guarantee hygienic treatment, it is recommended that the hand rest be disinfected
after use.
• We recommend that only wipe disinfectant be used to disinfect the hand rest.
• You can purchase a second power adapter (art no. 223006) separately from Promed if
required.
s
PecIaL QuaLIty Features
• All-In function:
DE
With the Promed UVL-54 All-In, all standard UV / LED gels, coatings and acrylics can
be cured.
• Pre-programmed operating times:
EN
Depending on the application, the user can select the time required (10 / 30 / 60 / 99 sec).
• Infra-red sensor
Once the customer inserts their hand into the device, the Promed UVL-54 All-In registers
FR
this using 2 sensors and the device starts automatically.
• Painless mode
IT
With this function, the output of the Promed UVL-54 All-In can be increased in stages
and therefore slow down the polymerisation of the gel for sensitive customers (e.g. for the
burning feeling on the nail bed when the gels are cured).
• Low power mode
ES
To switch the Promed UVL-54 All-In between 48 W and 54 W output.
NL
RU
PL
SE
FI
/

accessorIes