Declaration Of Conformity - Eurotherm T2550 Handbuch

Manufacturer's name:
Manufacturer's address:
Product type:
Model(s):
Safety specification:
EMC emissions specification:
EMC immunity specification: BS EN61326-1:1997 Industrial locations
Eurotherm Limited hereby declares that the above products conform to the safety and EMC
specifications listed. Eurotherm Limited further declares that the above products comply
with the EMC Directive 89 / 336 / EEC amended by 93 / 68 / EEC, and also with the Low
Voltage Directive 73 / 23 / EEC.
Signed: ______________________________________
IA249986U690/2 (CN23111) Jan 07
All rights are strictly reserved. No part of this document may be reproduced, modified, or transmitted in any form by
any means, nor may it be stored in a retrieval system other than for the purpose to act as an aid in operating the
equipment to which the document relates, without the prior written permission of the manufacturer.
The manufacturer pursues a policy of continuous development and product improvement. The specifications in this
document may therefore be changed without notice. The information in this document is given in good faith, but is
intended for guidance only. The manufacturer will accept no responsibility for any losses arising from errors in this
document.
T2550 HANDBOOK

Declaration of Conformity

Eurotherm Limited
Faraday Close, Worthing, West Sussex
BN13 3PL, United Kingdom
T2550 Modular Control System
AI2, AI3, AI4
AO2,
DI4, DI6, DI8
DO4, DO8,
FI2,
RLY4,
T2550 IOC,
T2550 Backplane.
BS EN61010-1
BS EN61326-1: 1997 Class A
(including amendments A1, A2 and A3)
(including amendments A1, A2 and A3)
Signed for and on behalf of Eurotherm Limited
William Davis
(General Manager)
© 2007
Including terminal units
and accessories
Dated: ___________________