Genmitsu 3018-PROVer V2 CNC Benutzerhandbuch Seite 25

Part 2- Mechanical Installation
STEP 10 Installing Spindle
What you will need
Wrench (13mm, 17mm) ER11 1/8" Collet
Spindle 18 3mm Allen Wrench
4 19 27
1. Unscrew the black collet nut from the spindle to insert the collet. Make sure the collet is locked in place by pushing it
till it "clicks". Then screw the black collet nut and Collet back into the spindle.
23