Parkside Performance PBSPA 12 C3 Originalbetriebsanleitung Seite 24

GB IE
Removing/inserting­
the Battery
1.­ To­remove­the­battery­(5)­from­the­ap-
pliance,­press­the­release­button­(6)­on­
the­battery­and­pull­out­the­battery.
2.­ To­insert­the­battery­(5),­place­it­on­the­
guide­track­and­push­it­into­the­appli-
ance.­It­will­audibly­snap­in.
Checking­the­battery­
charge level
The­battery's­(5)­charge­level­is­indicated­
by­the­charge­state­indicator­(9).
The­LEDs­indicate­the­battery's­charge­
level,­when­the­device­is­in­operation.
Press­and­hold­the­power­button­(8).
red-yellow-green => Battery fully charged
red and yellow => Battery half charged
red => Battery needs to be charged
Recharging the battery
Allow a hot battery to cool before
charging.
­ Charge­the­battery­(5)­when­only­
the­red­LED­on­the­level­indicator­is­
illuminated.
PLGK 12 A2 PLGK 12 B2
Charging
time­(h.)
PAPK 12 A3
PAPK 12 B3
PAPK 12 D1
1.­ Remove­the­battery­(5)­from­the­appli-
ance if necessary.
2.­ Insert­the­battery­(5)­in­the­charging­com-
partment­of­the­battery­charger­(17).
24
1 0,5
2 1
2,5 1,1
3.­ Plug­the­battery­charger­(17)­into­a­
mains outlet.
4.­ Unplug­the­battery­charger­(17)­from­
the mains.
5.­ Pull­the­battery­(5)­out­of­the­battery­
charger­(17).
Overview of the LED indicators on
the charger (17):
Green LED illuminated while the
rechargeable battery is not inserted:
Charger is ready
Green LED lights up: Battery is charged
Red LED lights up: Battery charging
Red LED flashes: Error
Choice­of­gear
Slide­the­gear­selector­(3)­to­1 or 2,
corresponding­to­a­low­or­high­torque­
selection.
1st gear .............................0-460­min
2nd gear .........................0-1750­min
A gear change may only be
performed­in­standstill­mode!
Set the direction of
rotation
you­can­select­the­direction­of­rotation­with­
the direction switch (clockwise and anticlock-
wise­direction)­and­secure­the­device­against­
accidental­start­up.­The­arrow­on­the­direc-
tion switch indicates the working direction.
1.­ Wait­for­the­device­to­shut-down.
2. Clockwise direction: Press
direction­switch­(4)­to­the­left.­
3. Anticlockwise direction: Press
direction­switch­(4)­to­the­right.
4. Switch lock:­Bring­direction­switch­(4)­
to­neutral­position.
-1
-1