TE Connectivity AT-66 Bedienungsanleitung Seite 115

528050-6 / 528050-5
1. Start the hydraulic Crimp Machine AT-66 by operating the electric
main switch of the hydraulic unit (1).
2. Turn the key switch button (2) to the right position into
Mode".
3. Press and hold the release button (4)
and simultaneously press the enter
button (3) twice in quick succession.
Release the release button (4). The
display should show
(Fig. 9.07).
Press the arrow button „up" (6) until
4.
(Fig. 9.27).
"MODE SEC OK"
3
"BLEED OK"
Seite / Page / Página 115 / 232
1
„Programm
2
is displayed
412-18954 Rev. F
Fig. 9.23
1
Fig. 9.24
Fig. 9.25
4
Fig. 9.26
Fig. 9.27
6
ECOC: EGC0 ; LOC: AI