Usb/Memory Card Operation - Renkforce SD-3023 Bedienungsanleitung

Operation

USB/memory card operation

The radio is equipped with a USB interface and a memory card reader for SD/MMC cards,
MP3 files stored on these media can be played.
Do not connect an MP3 player to the USB interface if it is battery operated.
The USB interface power supply can charge the installed batteries and thus lead to overheating
or even explosion of the batteries.

USB media and USB hard disks up to max. 40 GB and with power input of max. 1A can be connected
to the USB interface.
Only USB storage media can be operated at the USB socket. MP3 players with a USB port usually
switch into PC mode when this port is connected. In this mode, music files cannot be played. However
you can connection an MP3 player's audio output to the AUX IN port (22) at any time.
SD/MMC cards and SDHC cards up to max. 8 BG are supported.
The media must be formatted in FAT 32.
Due to the great variety of systems with USB and SD/MMC card interfaces and their different functions
that are sometimes producer-specific, we cannot guarantee that all media will be recognized and that
all the operational functions are available with this radio.
If the storage media is not recognised, then please remove it and plug it in again.
• Connect your USB storage medium with the USB port (23).
• If you use a memory card, insert it into the memory card reader (12).
• The player switches to the respective input automatically and starts replay.
• The last inserted medium is selected automatically.
58
Operating Instructions

English