Usb/Memory Card Operation - Renkforce BT-RSD1802K Bedienungsanleitung

Operation

USB/Memory Card Operation

The SD tuner is equipped with a USB interface and a memory card reader for SD/MMC cards.
MP3 files stored on these media can be played.
Do not connect any MP3-player to the USB interface if it is battery-operated.
The USB interface power supply may load the inserted batteries and cause overheating or
explosion of a battery.

USB media up to 32 GB and a power intake of up to max. 500 mA can be connected to the USB interface.
Only USB storage media can be operated at the USB socket. MP3 players with a USB port usually
switch into PC mode when this port is connected. In this mode, music files cannot be played. However,
you may connect the audio output of your MP3 player to the AUX IN (4).
Supports SD/MMC-cards and SDHC-cards up to 16 GB.
The media must be formatted in FAT 16 or FAT 32.
Due to the great variety of systems with USB and SD/MMC card interfaces and their different functions
that are sometimes producer-specific, we cannot guarantee that all media will be recognized and that
all the operational functions are available in this SD tuner.
If the storage medium is not recognised, remove it and insert it again.
• Connect your USB storage medium with the USB port (5).
• If you use a memory card, insert it into the memory card reader (10).
• The player switches to the respective input automatically and starts playback.
• The last inserted medium is selected automatically.
69