Function Of The Keys - Renkforce SD-3023 Bedienungsanleitung

Operation

Function of the keys

• BND/LOU/ENT button (4)
With this button you can select the band range of the radio unit.
There are 3 FM ranges and 2 AM ranges available:
F1 > F2 > F3 > MW

On each of the four band ranges, 6 stations can be stored on the station buttons 1-6 (16).
• Buttons  and  (2)
With these buttons the receiving frequency can be changed to adjust stations in radio operation.
Briefly pressing a button starts the automatic station search. (SEARCH is displayed).
The auto-scan only stops at the next station that can be received well.
By pressing a button longer, you activate manual station scan.
The display shows MANUAL.
In this mode, the frequency is changed until you release the corresponding button again. Brief presses of this button
changes the frequency step by step.

If buttons are not pressed for a longer period of time, the device switches back to automatic station
search. The display shows AUTO.
• Station buttons 1-6 (16)
If you shortly press these buttons, you can select a station you have pre-set.
If you want to store a station you are listening to, simply press the desired button for more than 1 second.

Each of the three FM band ranges (F1-3) and also the AM reception range (MW) has six station buttons.
Therefore you can assign 24 station buttons.
55