Usb/Memory Card Operation; F) Bluetooth -Operation - Renkforce 1490974 Bedienungsanleitung

e) USB/Memory Card Operation
The device is equipped with a USB interface and a SD memory card reader. MP3 files stored on these media can
be played.
Do not connect any MP3-player to the USB interface if it is battery-operated. The USB interface power
supply may charge the inserted batteries and cause overheating or explosion of a battery.
USB media up to 32 GB and a power intake of up to max. 1 A can be connected to the USB interface.
Only USB storage media can be operated at the USB socket. MP3 players with a USB port usually switch
into PC mode when this port is connected. In this mode, music files cannot be played. However, you may
connect the audio output of your MP3 player to the AUX (19).
Supports SD cards up to 32 GB. All media must be formatted in FAT 32.
Due to the great variety of USB and SD storage media and their different functions, some of which are
very producer-specific, we cannot guarantee that all media will be recognized and that all the operational
functions are available on this device.
If the storage medium is not recognised, remove it and insert it again.
• Connect your USB storage medium with the USB port (21).
• If you use a SD memory card, insert it into the SD card reader (23).
• The player switches to the respective input automatically and starts playback.
• The last inserted medium is selected automatically each time.
• Operation is identical with CD playback of MP3 files.
f) Bluetooth -Operation
®
To permit best phone reception and keep electromagnetic irradiation in the vehicle as low as possible,
always use an outside aerial in mobile phone operation.
In Bluetooth
playback device for Bluetooth
Bluetooth device and the car radio is possible, however, both devices must be coupled. This process is
®
called "pairing".
52
operation, the car radio can be used as hands-free system for mobile phones and/or as
®
A2DP audio streaming. Before transmission between your mobile phone or
®