Fault Display - Kuppersberg Rbn 1970 Technischer Pass

ENGLISH
FAULT DISPL AY
This appliance has 'fault display &
alarm' function. Once the sensors got
fault, there are alarms displayed on the
temperature displaying, the appliance
still cools but professional service engi-
neer should be called and check the ap-
pliance.
F2 – Sensor of adapt zone
F3 – Sensor of fridge apartment
F4 – Sensor of freezer compartment
F5 – Sensor of defrosting
2E – Fault of fan/motor in freezer
CE– Communication fault between
main panel and display panel.
The above Errors only show on dis-
play, no voice
Position
5°C/-18 °C
5°C/-18 °C
5°C/-18 °C
Super freezing function
Super cooling function
Please note!
The following shall not be considered as defects of the Product:
Discoloration of product materials when using the product
Noise of flowing coolant during compressor operation
Minor technical smells of plastic coming from a new product
Blushing of plastic and aging of rubber elements of the product over time
TECHNICAL PASSPORT
Integrated fridge freezer
Over temperature alarm in freezer: af-
ter freezer temperature arrives at the set
temperature, after that, if the tempera-
ture rises to >-1 °C, the alarm will start,
accompany with flash of freezer tempera-
ture digit. Press any button to cancel the
voice alarm. The flash will remain until
the temperature is >-1 °C.
PS: Main board locates in com-
pressor compartment
Conditions
Summer or ambient temperature between 25-35°C
Spring, autumn or ambient temperature between
15-25°C
Winter, or ambient temperature between 5-15°C
Super freeze
Super cooling
35