Kuppersberg RBN 1970 Technischer Pass Seite 29

ENGLISH
If there's water in the base of the re-
frigerator compartment, check:
 The drain hole at the back of the
compartment is clear.
If ice has formed on the back wall of
the fridge:
 It is normal for some ice droplets
to form on the back wall of the fridge.
This does not constitute a fault with the
appliance.
 Ensure that no items inside the
fridge are in contact with the back wall.
 Check that there is some resis-
tance when opening the door of the ap-
pliance. If it opens at the slightest touch
it may mean that the door seal needs to
be replaced.
 Check the door seal for any kinks,
debris or damage. If you notice any, and
are unable to resolve the issue yourself,
contact Customer Care so that the seal
can be replaced.
 This can be due to the decor
door(s) not being properly fitted. If you
are at all unsure, ask your fitter to check
the decor doors.
TECHNICAL PASSPORT
Integrated fridge freezer
If excessive ice has formed in the
freezer:
 Check that there is some resis-
tance when opening the door of the ap-
pliance. If it opens at the slightest touch
it may mean that the door seal needs to
be replaced.
 Check the door seal for any kinks,
debris or damage. If you notice any, and
are unable to resolve the issue yourself,
contact Customer Care so that the seal
can be replaced.
 This can be due to the decor
door(s) not being properly fitted. If you
are at all unsure, ask your fitter to check
the decor doors.
If one or more of the LED units within
the appliance is not working:
 Contact Customer Care to arrange
a service visit.
29