Display Controls - Kuppersberg Rbn 1764 Technischer Pass

ENGLISH

DISPLAY CONTROLS

Use your appliance according to the
following control regulations, your ap-
pliance has the corresponding func-
tions and models as the display panels
showed in the pictures below. When the
appliance is powered on for the first time,
Electronic Control (located at the top of appliance)
1. Power
If you want to stop using it, you
can turn the appliance off by pressing
«Power» button for 3 seconds.
Press and hold «Power» button for
3 seconds to turn the standby function on
or off. When the standby function is on,
the display panel will show «––».
IMPORTANT!
Do not store any food in the fridge
during this time. If you will not use the
refrigerator for a long time, please pull
the plug.
NOTE: When the standby function
is on, the refrigerator is stopped cooling.
2. Eco
Press the «Eco»
the energy saving function, the
will be illuminated. When the Eco func-
tion is on, the temperature of fridge is
automatically switched to 6°C and the
utton to turn on
icon
TECHNISCHER PRODUKTPASS
the backlighting of the icons on display
panel starts working. If no button have
been pressed and the doors are closed,
the backlighting will turn off after one
minute.
temperature of freezer is automatically
switched to -17°C .
When Eco functio «Temp»
button and the refrigerator tempera-
ture setting will revert back to the previ-
ous setting.
3. Super Cool
The Super Cool feature helps to keep
food stored in the refrigerator at the set
temperature during periods of high usage,
large grocery loads, or temporarily warm
room temperatures.
The Super Cool feature lowers the
temperature in the fridge compartment.
1. Press the «Super Cool»
activate this function. The
illuminated the fridge temperature indica-
tor will display 2°C.
2. Super cool will automatically turn
off after 6 hours.
Built-in refrigerator
or «Eco»
button to
icon will be
43