Installation Preparation; Ventilation - Kuppersberg Rbn 1970 Technischer Pass

TECHNICAL PASSPORT
Integrated fridge freezer
INSTALL ATION
PREPARATION
This appliance must never be in-
stalled close to heat sources, e.g. heating
elements or cookers, nor in damp places.
Seek the help of another individual, or
two, when installing this appliance. This
appliance may have sharp edges. Wear
adequate PPE for the task and environ-
ment.
 To ensure the appliance is level,
you should use the height adjustable feet
at the front of the appliance.
 The cooling system at the rear of
the appliance must not touch the rear
wall. The greater the gap, the better.
 The appliance must be installed
with adequate ventilation. Ensure that
there is clearance above the appliance
to allow air to escape and that there is
space between the rear of the appliance
and the wall.
VENTIL ATION
The main consideration when install-
ing any refrigeration unit into a fitted
kitchen is ventilation. The heat removed
from the cooling compartment needs to
be dissipated into the atmosphere. Incor-
rect ventilation can lead to premature
compressor failure, excessive power con-
sumption, total system failure and may
invalidate the warranty provided with
the appliance. For products intended to
be installed into a tall housing unit, the
requirements on the following page need
to be met:
30
ENGLISH