Changing And Saving The Cup Filling Level In Powder Mode - WIK 9752 D Bedienungsanleitung

GB

Changing and saving the cup filling level in powder mode

112
Press the "Coffee delivery" button
‹
NOTE
►
You can terminate the coffee delivery prematurely at any time by
briefly pressing the "Coffee delivery" button
ly.
The appliance is set at the factory to standard quantities. You can set the
cup filling level individually for each cup size. Proceed as follows:
Select the function "powder coffee" by pressing button (B)
‹
Press button (C) repeatedly until the cup symbol for which you wish to
‹
change the cup filling level is displayed.
Place a corresponding cup under the coffee delivery spout (e.g. coffee
‹
mug).
Fill the coffee powder compartment with coffee powder.
‹
Then press the "Coffee delivery" button
‹
the desired cup filling level is reached.
Release the button. Your desired new cup filling level is now saved.
‹
NOTE
►
Repeat the procedure if you wish to change the filling level also for
the other cup sizes.
►
The values remain stored even when the appliance is switched off
and apply also in bean mode. Should you change your cup size, you
can adapt the cup filling level individually at any time or reset the
filling level with a "Reset". The settings that are then reset are descri-
bed in the chapter Resetting the appliance to the works settings
(RESET).
Operation and function
(5) to deliver the coffee.
(5) pressed previous-
(5) and hold it pressed until
.