GB
140
The brewing unit is positioned. The following then appear alternately on
the display:
The program carries out a total of 14 cycles. The pause times serve to allow
the decaling liquid to work.
The following then appears on the display:
Turn the rotary switch "hot water/steam" (17) to position
WARNING
Risk of scalding when the hot water nozzle is active!
Hot water from the steam nozzle can cause scalding.
►
Activate the hot water nozzle only when you have positioned a
vessel under the nozzle or the nozzle is turned so that the liquid can
run into the drip tray.
The descaling process via the hot water nozzle is started.
Cleaning and care
.