Changing And Saving The Cup Filling Level In Bean Mode - WIK 9752 D Bedienungsanleitung

GB

Changing and saving the cup filling level in bean mode

108
Press the "Coffee delivery" button
‹
NOTE
►
During coffee preparation the coffee powder is first wetted with a
small amount of water for prebrewing. The actual brewing process
takes place after a short pause.
►
You can terminate the coffee delivery prematurely at any time by
briefly pressing the "Coffee delivery" button
ly.
The appliance is set at the factory to standard quantities. You can set the
cup filling level individually for each cup size. Proceed as follows:
Press button (C) repeatedly until the cup symbol for which you wish to
‹
change the cup filling level is displayed.
NOTE
►
During this process you save the cup filling level for 1 cup. If the app-
liance is in 2-cup mode, you cannot program the cup filling level.
Place a corresponding cup under the coffee delivery spout (e.g. coffee
‹
mug).
Press button (A) repeatedly until the desired ground coffee quantity
‹
symbol is displayed.
Then press the "Coffee delivery" button
‹
the desired quantity of coffee has been delivered.
Release the button. The new cup filling level is now saved.
‹
Operation and function
(5) to deliver the coffee.
(5) pressed previous-
(5) and hold it pressed until