WIK 9752 D Bedienungsanleitung Seite 131

Cleaning and care
Dry the brewing unit.
‹
Install the brewing unit again, turning the brewing unit into the right
‹
position (the delivery tube facing downwards and to the front), insert
the brewing unit into the guide grooves and push the brewing unit
completely into the appliance.
Install the coffee delivery unit again by hooking in the door at the bot-
‹
tom and engaging it with slight pressure at the top.
NOTE
►
You can only switch on the appliance when the brewing unit and
the coffee delivery unit are installed. After switching on, the brewing
unit is adjusted and then the normal heating process starts. During
preparation of the first coffee after cleaning, an increased amount of
water runs into the waste container.
/
I
GB
131