Hypertherm Powermax45 SYNC Bedienungsanleitung Seite 7

Step 5 – Set the power switch to ON (I)
200 V - 400 V
Step 6 - Unlock and fire the torch
1. Move the torch lock switch to the green unlocked position.
After you unlock the torch, the system automatically goes to Cut mode or Gouge mode
system amperage
1
Powermax45 SYNC Getting Started Guide
and sets the gas pressure for the cartridge you installed on the torch.
2
2
811520MU
400 V, 480 V
Cut
Revision 0 English
Getting Started Guide
, sets the
1
Gouge
7