Connections And Interfaces - IKA RET control Betriebsanleitung

Settings
In the menu „Settings"
allows the user to customize
the device to their needs.
Confirm again the displayed
value.
• With 3-point calibration
a third buffer solution
used.
After the calibration has
been carried out success-
fully, pH measurements
are carried out
Note:
The use of the temperature
sensor is limited by the-
maximum permissible
temperature.
Make sure that the
temperature of the liquid, the maximum allowed.
Temperature does not exceed the pH probe.

Connections and interfaces

Micro-USB
Bluetooth
The device allows the user a Bluetooth connection to a WiCo - Box
produce.
The unit can run the
WiCo - Box
in a range of 10 meters
(in open space / no
Obstructions) wireless
operated.
Bluetooth
Connect
Observe the separate operating instructions for WiCo-Box.
28