E) Assembly Of The Mast; F) Assembly Of The Mast To The Body Of The Boat - Reely 1195424 Bedienungsanleitung

e) Installing the Mast
• The mast has two parts and must be assembled
before installation on the deck of the boat. You can
glue the two parts together firmly (recommended)
or leave them pluggable for transport reasons.
• Push the sleeve (1) onto the lower part of the mast
(2) up to about its half. Now push the upper mast (4)
with adapter (3) onto the lower part of the mast.
• We recommend reinforcing the plug connection bet-
ween the two mast parts by adding a little 5-minute
epoxy resin.

f) Assembly of the Mast to the Body of the Boat

• Plug the mast on the upper deck into the mast hol-
der hole as shown in figure 6, item 1.
• Attach the transverse beam (2) of the mainsail
(called a „boom" in sailing) to the mast with an M2
screw/nut (figure 6, item 3).
The nut must be secured against coming loose with
a drop of threadlocker varnish.
• Hook the rope of the „boom" into the formed part of
the mast base (4) and lock it.
Tension the rope with a tensioner (works similar-
ly as in a camping tent) so that the rope pulls the
„boom" down slightly.
• To be able to control the angle of attack of the main-
sail, the „boom" must be connected to the control
line of the sail winch as shown in figure 6, item 5.
Figure 5
Figure 6
35