Appendix; 8.1 Certification; 8.1.2 Ce Marking; 8.1.3 Ul Marking - KEB Dynamic Line II Betriebsanleitung

Appendix

8. Appendix
8.1 Certification

8.1.2 CE Marking

CE marked servo motors were developed and manufactured to comply with the regulations of the Low-Voltage
Directive 2006/95/EC.
The servo motors must not be started until it is determined that the installation complies with the Machine directive
(2006/42/EG) as well as the EMC-directive (2004/108/EC)(note EN 60204).
The servo motors meets the requirements of the Low-Voltage directive 2006/95/EC. The harmonized standards
EN 60204-1, EN 60034, EN 292-1 and EN 292-2 were used..
An appropriate declaration of conformity is available if necessary via our internetportal.

8.1.3 UL Marking

Acceptance according to UR and cUR is marked at KEB servo motors
with the adjacent logo on the type plate as well as by the E-file
GB - 35