LEMKEN FixPack Betriebsanleitung Seite 27

7 PARKING THE PLOUGH WITH ATTACHED FIXPACK
The plough with attached FixPack may only be parked on level and firm ground.
With FixPack in swung-in position the plough can be detached according to the
instruction book of the plough. With the FixPack in working position the plough
can be parked without any stand elements.
Warning: The FixPack may only be attached to the plough or detached from
the plough, when the plough is attached to the tractor. The plough
may not be detached from the tractor, when the FixPack is positioned
in swung-in but hanging position.
8 LUBRICATION
The grease points must first be greased
after 10 working hours and then every 50
working hours. The guiding of the locking
pins must be greased regularly, in order to
ensure their function.
• Repair-, maintenance-, cleaning operations and adjustments
should be carried out with tractor brakes applied and engine
switched off. Remove ignition key!
• When conducting maintenance work on a lifted implement always
place suitable supports underneath!
• Any spare parts fitted must meet with the implement manufacturer's fixed
technical standards. This is ensured by using genuine spareparts!
• When conducting electrical welding operations on the tractor or on the
mounted implement remove cable from the generator and the battery!
• Before working on the electric gear disconnect battery cables!
25