Manitou MRT-X 2470 Privilege Plus ST3A S1 Betriebsanleitung Seite 303

Configure the TFF fork carriage and couple it to the rotating telehandler
Position the rotating telehandler with TFF fork carriage coupled in a safe place, with ample cle-
arance and clear of obstacles of any sort.
- lower the telescopic arm holding the forks just lifted off the ground (

- release both fork (3, 23) remove the sliding blocks (1,

fasten them (2, 23),

- move both forks (4, 24) towards the outside of the fork carriage and retain them by refit-

ting the sliding blocks (1,

the screws (2, 23),
- lower the arm to rest the forks (5,

23) towards the inside of the fork carriage, fastening them with

25) on the ground,

22) ,
23), by undoing the screws with
31
22
2
2 2
2 1
1
1
2
1 1
1
2
3 3
23
4 4
24
5
5
25
EN