Herunterladen Diese Seite drucken

Scheppach EEB1500 Original Bedienungsanleitung Seite 22

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

Service information
With this product, it is necessary to note that the fol-
lowing parts are subject to natural or usage-related
wear, or that the following parts are required as con-
sumables.
Wearing parts*:drill, carbon brushes
* may not be included in the scope of supply!
15. Disposal and recycling
The device is supplied in packaging to avoid
transport damages. This packaging is raw
material and can thus be used again or can
be reintegrated into the raw material cycle.
The device and its accessories are made of
different materials, such as metal and plastic.
Take defective components to special waste disposal
sites. Check with your specialist dealer or municipal
administration!
16. Troubleshooting
The following table shows fault symptoms and describes remedial measures in the event of your machine failing to work
properly. If you cannot localise and rectify the problem with this, please contact your service workshop.
Fault
Device does not start
Device is not constantly
running
Device blocks during
drilling
22 | GB
Possible cause
• Mains voltage is not on
• On/off switch is defective
• Carbon brushes worn
• Motor defective
• Power cable is damaged
• Carbon brushes are used
• Power cable is damaged
• Internal connections are loose
• On/off switch is defective
• Drill is heavily worn out
• Major obstacles such as large stones or
big roots may be in the soil
www.scheppach.com
Old devices must not be disposed of with house-
hold waste!
This symbol indicates that this product must
not be disposed of together with domestic
waste in compliance with the Directive
(2012/19/EU) pertaining to waste electrical and
electronic equipment (WEEE). This product must be
handed over at the intended collection point. This can
be done, for example, by returning it when purchasing
a similar product or delivering it to an authorised col-
lection point for the recycling of old electrical and
electronic devices. Improper handling of waste equip-
ment may have negative consequences for the envi-
ronment and human health due to potentially hazard-
ous substances that are often contained in electrical
and electronic equipment. By properly disposing of
this product, you are also contributing to the effective
use of natural resources. You can obtain information
on collection points for waste equipment from your
municipal administration, public waste disposal au-
thority, an authorised body for the disposal of waste
electrical and electronic equipment or your waste dis-
posal company.
Remedy
• Check socket or power supply; if necessary,
have it repaired by a qualified electrician
• Repair by an authorised service centre
• Repair by an authorised service centre
• Repair by an authorised service centre
• Check the extension cable and have it
repaired, if necessary.
• Repair by an authorised service centre
• Check the extension cable and have it
repaired, if necessary.
• Repair by an authorised service centre
• Repair by an authorised service centre
• Replace the worn part
• Pull the auger out of the drill hole and
remove stones and big roots by hand or
with the help of other tools

Werbung

loading

Diese Anleitung auch für:

5904703901