Scheppach EEB1500 Original Bedienungsanleitung Seite 19

• Pass the safety instructions on to all persons who
work on the machine. Staff commissioned to work
with the machine must read the operating manual
before starting work and, in particular the chapter
"Security instructions for augers". It is too late if
they read it during work. This particularly applies
to staff only occasionally working with the machine,
such as during set-up or maintenance.
• Observe all safety information and danger notices
on the machine.
• Ensure that all of the safety information and danger
notices on the machine are complete and in legible
condition.
• Be aware of environmental conditions at the work-
place.
• Ensure sufficient lighting at and around the ma-
chine.
• When the weather is bad, the ground is uneven or
in the event of slopes, ensure proper footing.
• All protective devices and covers must be installed
before any work is carried out on the machine.
• Keep bystanders, especially children, away from
your working environment.
• Prevent unauthorised people from coming in con-
tact with the machine.
• Ensure that children do not have access to the ma-
chine.
• Always pay attention and concentrate on what you
are doing. Remain sensible when working. Do not
use the device when you are distracted.
• Do not work with the machine while you are tired or
under the influence of drugs, alcohol or medication.
• The operating personnel must be at least 18 years
of age. Trainees must be at least 16 years of age
and may only work on the machine under supervi-
sion.
• Personnel working on the machine must not be dis-
tracted.
• Store the machine safely so that nobody can get
injured by the machine or put it into operation.
• Only use the machine according to its intended pur-
pose.
• Do not use the device where there is a risk of fire
or explosion.
• Wear appropriate work clothing that does not hin-
der your work.
• During work, wear hearing and eye protection.
• Wear safety shoes with steel toe caps, steel soles
and a non-slip profile.
• Wear tough work gloves.
• The safety equipment on the machine must not be
disassembled or made unusable.
• Installations, repairs and maintenance work may
only be carried out by specialists.
• All protective and safety equipment must be reas-
sembled immediately after repair, maintenance is
completed.
• Before troubleshooting, always switch off the motor
and pull out the mains plug.
• Look out for damaged parts and protective devices
• Defective parts must be repaired or replaced by an
authorised specialist.
• Only use original spare parts. Using spare parts
that are not original can be a risk for people or
cause material damage.
• The machine may only be used for its intended purpose.
The user alone is responsible for unintended use of
the machine. The manufacturer is not liable in the
event of unintended use.
Additional safety instructions
m ATTENTION!
This power tool generates an electromagnetic field
during operation. This field can impair active or pas-
sive medical implants under certain conditions. In or-
der to prevent the risk of serious or deadly injuries,
we recommend that persons with medical implants
consult with their physician and the manufacturer of
the medical implant prior to operating the machine.
Residual risks
The machine has been built according to the state-of-
the-art and the recognised technical safety require-
ments. However, individual residual risks can arise
during operation.
• Health hazard due to electrical power, with the use
of improper electrical connection cables.
• Before performing setting or maintenance work, re-
lease the start button and pull out the power plug.
• Furthermore, despite all precautions having been
met, some non-obvious residual risks may still re-
main.
• Residual risks can be minimised if the "Safety in-
formation" and the "Proper use" together with the
operating manual as a whole are observed.
• Avoid accidental starting of the machine: the oper-
ating button may not be pressed when inserting the
plug in an outlet. Use the tool that is recommended
in this operating manual. This is how to ensure that
your machine provides optimum performance.
• Keep your hands away from the work area, when
the machine is in operation.
www.scheppach.com
GB | 19