HBM TB2 Montageanleitung Seite 7

TB2
Accident prevention
According to the prevailing accident prevention regulations, once the trans­
ducers have been mounted, a covering agent or cladding has to be fitted as
follows:
• The cover or cladding must not be free to rotate.
• The cover or cladding should prevent squeezing or shearing and provide
protection against parts that might come loose.
• Covers and cladding must be positioned at a suitable distance or be
arranged so that there is no access to any moving parts within.
• Covering agents and cladding must also be attached if the moving parts of
the transducer are installed outside the movement and operating range of
persons.
The only permitted exceptions to the above requirements are if the various
parts and assemblies of the machine are already fully protected by the design
of the machine or by existing safety precautions.
1 Scope of delivery
Included in scope of supply:
• 1 Torque reference transducer
• 1 Mounting instructions
• 1 Manufacturing certificate
• 1 PVC cable 3m (6 pin Lemo
A0884-5.0 en/de
R
plug, free ends)
7
HBM