Werbung
Verfügbare Sprachen
Verfügbare Sprachen
2. Introduction
MANUFACTURER:
Scheppach GmbH
Günzburger Straße 69
D-89335 Ichenhausen
DEAR CUSTOMER,
We hope your new tool brings you much enjoyment and suc-
cess.
NOTE:
In accordance with the applicable product liability laws, the
manufacturer of this device assumes no liability for damage to
the device or caused by the device arising from:
• Improper handling,
• Failure to comply with the operating instructions.
• Repairs carried out by third parties, unauthorised specialists.
• Installing and replacing non-original spare parts,
• Application other than specified,
Please consider:
Read through the complete text in the operating manual be-
fore installing and commissioning the device.
The operating manual is intended to help the user to become
familiar with the machine and take advantage of its applica-
tion possibilities in accordance with the recommendations.
The operating manual includes important instructions for safe,
proper and economic operation of the device, for avoiding
danger, for minimising repair costs and downtimes, and for
increasing the reliability and extending the service life of the
device.
In addition to the safety instructions in this operating manual,
you must also observe the regulations applicable to the opera-
tion of the device in your country.
Keep the operating manual package with the machine at all
times and store it in a plastic cover to protect it from dirt and
moisture. They must be read and carefully observed by all
operating personnel before starting the work.
The device may only be used by personnel who have been
trained to use it and who have been instructed with respect
to the associated hazards. The required minimum age must
be observed.
In addition to the safety instructions in this operating manual
and the separate regulations of your country, the generally
recognised technical rules relating to the operation of such
machines must also be observed.
We accept no liability for accidents or damage that occur due
to a failure to observe this manual and the safety instructions.
20
GB
3. Device description (Fig. 1-9)
1.
Cutting device
2.
Hand guard
3.
Front handle
4.
Cold start lever (choke)
5.
Fuel pump primer
6.
On/Off button
7.
Throttle interlock
8.
Rear handle
9.
Throttle
10. Interlocking handle
11. Tank cover
12. Start pull cord
13. Silencer
13.1 Silencer outlet opening
13.2 Silencer screws
14. Spark plug connector
14.1 Spark plug
15. Wing screw
16. Air filter cover
17.
Air filter
18. Lubrication port
4. Scope of delivery
• Petrol hedge trimmer
• Oil-petrol mixing bottle (A)
• Spark plug wrench (B)
• Allen key, 4 mm (C)
• Blade guard (E) (pre-fitted)
• Operating manual
5. Proper use
The machine complies with the applicable EC machinery di-
rective.
Before starting any work, all protective and safety devices
must be in place.
These petrol hedge trimmers are intended to cut soft, newly
grown hedge material. It is not suitable for the cutting of
branches, solid wood or other cutting material.
The machine has been designed to be operated by one per-
son.
The operator is responsible for third parties in the area of op-
erations.
Observe all safety information and danger notices on the ma-
chine.
Ensure that all of the safety information and danger notices on
the machine are complete and in legible condition.
Only use the machine when in a technically faultless condi-
tion, appropriately and in compliance with the operating man-
ual and with full knowledge of safety and hazards!
In particular, rectify malfunctions that could impair safety im-
mediately (or commission rectification works accordingly)!
The manufacturer's safety, operating and maintenance speci-
fications as well as the dimensions given in the technical data
must be observed.
Relevant accident prevention regulations and other generally
recognized safety and technical rules must also be observed.
Werbung
