Inhaltsverzeichnis
Werbung
en
Switching on
the appliance
Fig. 1
Switch on the appliance with button 2.
Fig. 2
A warning signal sounds, AL" flashes
on the freezer compartment display 5.
Press the alarm off" button 6.
The warning signal switches off.
The set temperature is displayed when
the freezer compartment has reached
the temperature.
The factory has recommended and
set the following temperatures:
Refrigerator compartment:
Cool fresh compartment:
Freezer compartment:
Operating tips
S The fully automatic Nofrost system
keeps the freezer compartment and
refrigerator compartment free of ice.
Defrosting is no required.
S The sides of the housing are sometimes
heated slightly. This prevents conden
sation in the area of the door seal.
S If you cannot open the freezer compart
ment door immediately after closing it,
wait 2 3 minutes until the partial
vacuum has equalised.
30
Selecting
the temperature
Fig. 2
How to set your appliance:
S Using the selection button 1, select
the required refrigerator or freezer
compartment area.
S Using the selection button 9, set
the required temperature.
Fridge
(can be selected from +3 °C to +8 °C)
We recommend a setting of +4 °C.
Perishable food should not be stored
warmer than +4 °C.
+4 °C
0 °C
Cool fresh compartment
-18 °C
(can be selected from 0 °C to +4 °C)
The temperature in the cool fresh
compartment can be set.
Simultaneously press button, Fig. 2/1,
and button 9 -" for 2 seconds. Display 3
is activated. Keep pressing button 9 until
the required temperature is displayed
(consecutively from 1-4).
Freezer compartment
(can be selected from -16 °C to -26 °C)
We recommend a setting of -18 °C.
Werbung
Inhaltsverzeichnis
