Switching The Appliance On; Operating Tips; Setting The Temperature - Bosch KGD Serie Gebrauchsanleitung

en
Switching
the appliance on
Fig. "
Switch on the appliance with the On/Off
button 1.
A warning signal sounds. The
temperature display 2 flashes.
Press the temperature selection
button 4. The warning signal switches
off.
When the freezer compartment has
reached the set temperature,
the temperature display 2 is lit.

Operating tips

When the appliance has been
■
switched on, it may take several hours
until the set temperatures have been
reached.
Do not put any food in the appliance
beforehand.
The sides of the housing are
■
sometimes heated slightly. This
prevents condensation in the area of
the door seal.
If the freezer compartment door
■
cannot be immediately re-opened after
it has been closed, wait until the
resulting low pressure has equalised.
28
Setting
the temperature
Refrigerator compartment
Turn temperature controller, Fig. !/10,
to the required setting.
We recommend a medium setting.
Changing the setting clockwise will lower
temperatures in the refrigerator
compartment.
Select a very cold setting only
temporarily if:
the ambient temperature is high,
■
door is opened frequently,
■
large quantities of food are placed in
■
the refrigerator compartment.
Freezer compartment
The temperature can be set from -16 °C
to -26 °C.
Keep pressing temperature setting
button 4 until the required freezer
compartment temperature is set.
The value last selected is saved. The set
temperature is indicated on display 2.
We recommend a factory setting of -
18 °C in the freezer compartment.