Operating Elements - Schuberth Riderecall Bedienungsanleitung

C. SChuberth ridereCall
Note: The motorcycle unit must not be manipulated in any
way or damaged. Otherwise the warranty will become invalid
and the proper functioning of the system will no longer be
possible.
Note: SCHUBERTH recommends that you remove the
motorcycle unit from its mount when you leave the
motorcycle to prevent theft of the unit. To do this, push the
switch on the rear of the SCHUBERTH RiderEcall inwards and
remove the system from the mount. You should also press
the on/off switch to turn the device off and prevent
a false alarm being accidentally issued.
Note: To assure proper functioning of the RiderEcall system,
SCHUBERTH recommends that you keep the motorcycle unit
fixed to the handlebars of the motorcycle using the mount
supplied whenever possible. This assures the best possible
GPS/GSM signal reception.
Note: For problem-free functioning the SCHUBERTH RiderEcall
requires constant network coverage.
32

9. oPerating elements

On the motorcycle unit are four function buttons, four LED
indicators, a loudspeaker and a microphone.
The buttons are as follows:
= Emergency call cancel
= On/off
= Helmet sensor check button to check the number of helmet
sensors that are connected to the motorcycle unit
SOS = manual emergency call
From top to bottom, the LEDs indicate:
= GPS signal, GSM signal
= Connection established (SMS, voice call)
= Check of number of helmet sensors connected to the
motorcycle unit
= Maintenance LED