D) Cd Operation - Renkforce 1490974 Bedienungsanleitung

d) CD Operation

• Insert a CD (audio CD or MP3 CD) into the CD drive.
• The device automatically switches to CD playback.
Always insert the CD with the printed side up.
Button (5)
• Press this button to eject a CD.
Button 1/ (13)
• Push this button to interrupt the playback briefly.
• When you confirm the button again, playback will begin at the point where it was interrupted.
Buttons (1) and
With these buttons you can select individual tracks or search for a specific section within one track.
The arrows on the buttons indicate the search direction (forward or back).
• Only push the buttons briefly to jump to the next or previous track.
• Push the buttons longer to search a certain section within one track.
Buttons 5/ (17) and 6/
These buttons serve to select the folders on the storage medium (if present).
• selects the previous folder.
• selects the next folder.
If no folder structure is present on the storage medium or if it is an audio CD, these buttons have no
function.
Button 2/INT (14)
• Push this button to play each track approx. for 10 seconds.
• To de-activate this function, push the button again. Playback will be normal from this point onward.
Button 3/RPT (15)
• Press this key to activate the repeat function.
• Repeated pushing selects the different functions:
RPT ONE repeats the track currently played.
RPT FOLD repeats the folder currently played.
RPT ALL repeats the entire storage medium.
50
(7)
(18)