Herunterladen Inhalt Inhalt Diese Seite drucken

Program Type (Pty); Button Functions - Renkforce 1490974 Bedienungsanleitung

Inhaltsverzeichnis

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

Program Type (PTY)

This code gives the receiver information on the type of the transmitted programme (e.g. sports, classic, news etc.).
The listener can select his favourite programme more directly.
A national disaster alarm can also be sent this way. However, not all the radio stations offer the PTY service.
Clock Time (CT)
Many stations transmit the current time in the RDS data. If a radio receives this signal, it sets the in-built clock
automatically.
Therefore, when you leave the transmission area, the RDS system has the advantage that it switches to a similar
transmitter station that can be better received. However, it only changes when it finds a better station with the same
programme.
Short signal attenuations due to the reception cannot be eliminated by the RDS system either, since this would mean
that the car radios permanently switches back and forth. The listener would feel much more disturbed by this than by
short-term reception problems.
Another advantage of the RDS system is that the station name is displayed. The station name of an RDS station is
displayed in the car radio.

Button functions

BND/ID3 button (12)
• Push this button to select the band range of the radio unit.
• There are 3 FM ranges:
FM1 > FM2 > FM3
On each of the three band ranges, 6 stations can be stored on the station button 1-6 (13-18).
Buttons
(1) and
• With these buttons the receiving frequency can be changed to adjust stations in radio operation.
• Briefly pushing a button starts the automatic station search.
• The auto-scan only stops at the next station that can be received well.
• By pushing a button longer, you activate manual station scan.
• The display shows MANUAL.
• In this mode, the frequency is changed until you release the corresponding button again. Brief pushes of this button
changes the frequency step by step.
If buttons are not pressed for an extended period of time, the devices switches back to automatic station
search. The display shows AUTO.
(7)
47

Quicklinks ausblenden:

Werbung

Inhaltsverzeichnis
loading

Diese Anleitung auch für:

Rucd-1804bt

Inhaltsverzeichnis