Accepting/Rejecting An Incoming Phone Call - Renkforce 1490974 Bedienungsanleitung

Pairing
• Switch on the car radio.
• Switch your mobile phone on and activate the Bluetooth
• Activate the scan for other Bluetooth
• When the car radio was found, your Bluetooth
• Connect your mobile phone to the car radio.
• Enter the password 0000 if necessary to couple the two devices.
• After successful pairing, the display indicates the Bluetooth
• If pairing was not successful, try repeating the process. The car radio may have to be deleted in your mobile phone
first (see mobile phone instructions).
Only one Bluetooth
connection already, this connections must be interrupted first. This is done via the menu of your mobile
phone.
If the car radio or mobile phone with which there is an active connection is switched off or removed from
the range, the connection is interrupted. The Bluetooth
on again or when the mobile phone returns into the car radio range again, the connection is automatically
re-established. The display (4) now shows the Bluetooth
To permit this automatic establishment of connection, this function may have to be activated at the mobile
phone (read about this in your mobile phone's instructions).

Accepting/rejecting an incoming phone call

• Press the button MOD /
• Press the button F/PS /
Ending a phone call
• Press the button F/PS /
Redial
• Keep the button MOD /
• The display indicates REDIAL.
Caller ID display
• For an incoming phone call, the caller ID is shown in the display (4).
If the caller suppresses his caller ID or the mobile phone network does not support this feature, the caller
ID cannot be displayed.
devices in the reception area at your mobile phone.
®
device shows the Bluetooth
®
device at a time can be coupled with the car radio. If there is an active Bluetooth
®
(2) to accept an incoming phone call.
(8) to reject an incoming phone call.
(8) to terminate a call.
(2) pushed to call the last number dialled.
mode here (see instructions of the mobile phone for this).
®
name of the car radio.
®
symbol permanently.
®
symbol in the display (4) flashes. When switching
®
symbol permanently again.
®
®
53