Troubleshooting - Scheppach KS1500 Original Bedienungsanleitung

16. Troubleshooting

The following table shows fault symptoms and describes remedial measures in the event of your machine failing to
work properly. If you cannot localise and rectify the problem with this, please contact your service workshop.
Fault
Chain sharpener does
not run
Chain sharpener grinds
with interruptions
Grinding disc becomes
hot
Engine hums, grinding
disc stays stationary
Unusual vibrations
28 | GB
Possible cause
No power or power failure
Extension cable faulty
Mains plug, engine or
switch faulty
Extension cable faulty
Internal fault
On/off switch defective
Grinding disc is blunt or
defective
Grinding disc jammed
Grinding disc is defective
www.scheppach.com
Remedy
Check power supply, socket, fuse
Check extension cable, replace defective cable imme-
diately
Have the engine or switch checked or repaired by a
licensed electrician or replaced with original parts.
Check extension cable, replace defective cable imme-
diately
Please contact customer service for this
Please contact customer service for this
Replace grinding disc
Remove object
Replace grinding disc