Introduction; Device Description; Scope Of Delivery; Proper Use - Scheppach KS1500 Original Bedienungsanleitung

1.

Introduction

Manufacturer:
Scheppach GmbH
Günzburger Straße 69
D-89335 Ichenhausen
Dear customer,
We hope your new tool brings you much enjoyment
and success.
Note:
In accordance with the applicable product liability
laws, the manufacturer of this device assumes no lia-
bility for damage to the device or caused by the device
arising from:
• Improper handling,
• Failure to comply with the operating instructions.
• Repairs carried out by third parties, unauthorised
specialists.
• Installing and replacing non-original spare parts,
• Application other than specified,
• Failure of the electrical system in the event of the
electrical regulations and VDE provisions 0100, DIN
13 / VDE0113 not being observed.
Please consider:
Read through the complete text in the operating manu-
al before installing and commissioning the device.
The operating manual is intended to help the user to
become familiar with the machine and take advantage
of its application possibilities in accordance with the
recommendations.
The operating instructions include important instruc-
tions for the safe, proper and economic operation of
the machine, for avoiding danger, for minimising repair
costs and downtimes and for increasing the reliability
and extending the service life of the machine.
In addition to the safety instructions in this operating
manual, you must also observe the regulations appli-
cable to the operation of the machine in your country.
Keep the operating manual package with the machine
at all times and store it in a plastic cover to protect it
from dirt and moisture. They must be read and careful-
ly observed by all operating personnel before starting
the work. The machine may only be used by personnel
who have been trained to use it and who have been
instructed with respect to the associated hazards. The
required minimum age must be observed.
In addition to the safety instructions in this operating
manual and the separate regulations of your country,
20 | GB
the generally recognised technical rules relating to the
operation of such machines must also be observed.
We accept no liability for accidents or damage that
occur due to a failure to observe this manual and the
safety instructions.
2. Device description (Fig. 1 - 9)
1. Handle
2. Grinding disc cover
3. Screws for grinding disc cover
4. Grinding disc
5. Adjusting screw for depth stop
6. Chain guide rail
7. Tightening lever
8. Scale
9. Locking nut
10. Grinding base
11. Chain tensioning unit
12. Adjusting screw for chain stop
13. Chain stop
14. Cable holder
15. Mains cable
16. Grinding head
17. On/off switch
18. Knurled nut

3. Scope of delivery

• Chain sharpener
• Handle (1)
• Chain tensioning unit (11)
• Adjusting screw for depth stop (5)
• Adjusting screw for chain tensioning unit (12)
• Operating manual

4. Proper use

The chain sharpener is suitable for sharpening saw
chains.
The machine may only be used in the intended manner.
Any use beyond this is improper. The user/operator, not
the manufacturer, is responsible for damages or inju-
ries of any type resulting from this.
www.scheppach.com