Werbung
Verfügbare Sprachen
Verfügbare Sprachen
MODEL
RAS-25QH1, RAS-32QH1
2. CLEANING OF FRONT COVER
The front grille can be washed in water. It can be kept clean at all times.
¢ Front grille can be removed and washed in water. Clean it using a soft
sponge, etc. If detergent is used, rinse well.
When the air conditioner is to be cleaned without removing the front grille,
clean both the body and remote controller with a dry soft cloth.
e Wipe off water completely. If water remains on the display section or light
receiver section, this could cause a malfunction.
A CAUTION
* Do not spray water on the unit. It may cause an
electric shock.
Removing the Front Grille
Attaching the Front Grille
The front grille can be removed and washed with water.
Be sure to hold the front grille with both hands to detach
and attach it.
.
Projection
Arm
Arm
Hole
Groove
* When the grille is fully opened with both hands, push the right
* Move the projections of the left and right
arm to the inside to release it, and while closing the grille
arms into the grooves in the unit and
slightly, pull it out forward.
securely insert them into the holes.
A CAUTION
« Never use hot water (above 40°C), benzine,
gasoline, acid, thinner or a brush, because they will
damage the plastic surface and the coating.
3. MAINTENANCE AT BEGINNING OF LONG OFF PERIOD
e Running the unit setting the operation mode to -~ (FAN)
ana
and the fan speed to HI for about half a day on a fine
<a
day, and dry the whole of the unit.
e Turn off the circuit breaker.
:
"
¢
e
¢
5°
e
Air Blow } ¢
'
Pi
Werbung
