Werbung
Verfügbare Sprachen
Verfügbare Sprachen
(MODEL RAM-80QH1)
1.
Connection of the drive checker.
Drive checker
neues connector
Control P.W.B.
There are 6 lamps (LEDs) on
the drive checker. "When the
drive circuit is normal, these
Jamps blink for about 3
second in sequence." If any
lamp lights from the
beginning or does not light to
the end, the drive circuit
(control P.W.B.) is abnormal.
Terminal ring
Lamp (LED)
2.
Simplified checking method.
NO | Check the phase that the
Do lamps from ©@ to @ light om. lamp
lights
from
the
beginning or the lamp does
not light to the end.
ve
o
Replace
the parts
of the |
Replace the power module
if it is abnormal.
Norma' Check the lighting mode of
the drive checker again.
| | ponaa
Also
check
the _ position
detection circuit for the phase
the checker lamp of which is
not normal.
in sequence?
Re-check
if there are any
parts not checked
in the
drive circuit.
Return
the connection
to
the
original
state
and
perform a final check.
- 250 -
Werbung
