Hitachi RAS-25QH1 Technische Information Seite 38

HOW TO SET THE SLEEP TIMER
Set the current time at first if it is not set before (see the pages for setting the current
time). Press the ) (SLEEP) button, and the display changes as shown below.
ot
. 1 hour — 2 hours — 3 hours — 7 hours
Sleep timer Hees Sleep timer off aes |
Sleep Timer: The device will continue working for the designated
number of hours and then turn off.
Point the signal window of the remote controller toward the indoor
unit, and press the SLEEP button.
The timer information will be displayed on the remote controller.
SLEEP | The TIMER lamp lights with a beep from the indoor unit. When the
sleep timer has been set, the display indicates the turn-off time.
e) . oOo" cl: 3 q Example: If you set 3 hours sleep
aa | time at 11:38 p.m., the turn-off
at H time is 2:38 a.m.
Sleep The device will be turned off by the sleep
timer) —> timer and turned on by on-timer.
1 Set the ON-timer.
2 Press the (&) (SLEEP) button and set the sleep timer.
For heating:
iy in this case, the device will turn
Off in 2 hours (at 1:38 a.m.) and
turn on early so that the preset
temperature will be almost
reached at 6:00 next morning.
Point the signal window of the remote controller toward the indoor unit, and press the C
(CANCEL) button.
The © (RESERVED) sign goes out with a beep and the © (TIMER) lamp turns off on the indoor
unit.
If you set the sleep timer when the off-
timer or on/off-timer has been set earlier,
the sleep timer becomes effective instead
of the off- or on/off-timer set earlier.
- 36 -